- Description
- Inquiry
Overview
MSC90S DIN Mounted Switch Signal Isolator, Signal Converter, contact switch, proximity switch input, with input-output-power isolated, transmitting and isolating the switch signal to various instruments or DCS, PLC etc control systems, with positive, reserve control.
Feature
- 1 input 1 output, 1 input 2 outputs, 2 inputs 2 outputs
- Power-Input-Output isolation: 1.5KVrms, 1min, 50HZ
- Input: contact switch, proximity switch (F≤5Khz)
- Output: Relay contact point, transistor: collector, emitter
- With LCD indicator or without indicator
- Standard 35mm Rail Installation with pluggable terminals
- Size:109×116.5×18.5mm
- Independent power supply :20-32VDC, AC100-260VAC
Specification
Type | 1 input 1 output, 1/2 input 2 outputs | l Isolated ability | Input-output-power 1.5KV, 1min, 50Hz |
l Input | Insulation resistance | Input-output-power ≥100MΩ/500VDC | |
Input Signal | contact switch, proximity switch | Power supply | AC100-265V(50-60HZ); DC24V(+-10%) |
Frequency | ≤5Khz | Consumption (AC100-265V) | <1.7W/(1 output); <2.2W (2 outputs) |
Voltage | ≈8V (in open circuit) | Consumption (24VDC) | <2.5W/(1 output); <3W (2 outputs) |
Current | ≈8mA (in short circuit) | Case material/Protection | PC/ IP20 |
l Output | EMC | GB/T18268 (IEC61326-1) | |
Output Signal | Relay or transistor | Size: | 121.2Xx108x13mm |
Relay output | 10A/125VAC, 2A/30VDC | N.W.: | 0.14kg |
Relay Response time | ≤5ms | Working Temperature | -20 to 60℃ |
Transistor Output | Collector, emitter output | Working Humidity | 25%-85% (RH) |
Collector output | High level VCC <30V, Low:<2.5V | Storage temperature | 40 to 80℃ (No dew) |
Input and Output character when they are set to be controlled as same phase | |||
The switch is on or input loop current >2.1mA, relay output or transistor is working ON, input indicator is ON | |||
The switch is off or input loop current >1.2mA, relay output or transistor is working OFF, input indicator is OFF |
Size (mm)
Order Code
MSC90S: DIN Rail Mount SWITCH Signal Converter | ||||||||
Order Code: E.g.: MSC90S-N11-SNLL-N | Description | |||||||
MSC90S | -X | X | -X | X | X | X | X | MSC90S Switch Signal Converter |
Indicator | -N | Without indicator | ||||||
-D | With indicator | |||||||
Input-Output NO. | 11 | 1 Input 1 output | ||||||
12 | 1 input 2 output | |||||||
22 | 2 input 2 output | |||||||
INPUT1 | -S | Switch signal input | ||||||
INPUT2 | N | None | ||||||
S | Switch signal input | |||||||
OUT1 | L | Relay contact point output | ||||||
T | Transistor output | |||||||
OUT2 |
N | None | ||||||
L | Relay contact point output | |||||||
T | Transistor output | |||||||
Power Supply | -N | 100-260VAC (50-60Hz) | ||||||
-D | 24VDC |